The Impact of Heat Exchanging Internals on Hydrodynamics of Bubble Column Reactor
Author | : Ahmed Jasim |
Publisher | : |
Total Pages | : 96 |
Release | : 2016 |
ISBN-10 | : OCLC:952594556 |
ISBN-13 | : |
Rating | : 4/5 ( Downloads) |
Download or read book The Impact of Heat Exchanging Internals on Hydrodynamics of Bubble Column Reactor written by Ahmed Jasim and published by . This book was released on 2016 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt: "In this study, the impact of configuration and size of vertical heat exchanging internals in bubble columns on gas holdup, specific gas-liquid interfacial area, bubble chord length, and bubble rise velocity were investigated. Three different configurations of internals, each covering 25% of the column's cross-sectional area, were used to simulate the heat exchanging tubes utilized in the F-T process. The First configuration is a circular-like arrangement of 0.5 inch diameter vertical rods, whereas the second is a hexagonal-like arrangement of 0.5 inch diameter vertical rods. The third configuration is also a circular arrangement but of 1 inch diameter vertical rods used to examine the effect heat exchanging tubes diameter on the hydrodynamics. The experiments were carried out in a 14 cm inner diameter Plexiglas bubble column using air-water system, at superficial gas velocities in the range of 0.02 to 0.45 m/s, measured based on free cross-sectional area of the column available for fluid flow. 4-point optical fiber probe technique was used to collect the diameter profiles of the hydrodynamic parameters. In comparison to bubble column without internals, the obtained result showed that the configuration of the internals significantly affect the hydrodynamics and also the flow resistance inside the column. Steeper gas holdup and specific interfacial area profiles observed when the 0.5 inch circular arrangement internals is used. A distinct asymmetrical radial profiles of gas holdup and specific interfacial area were obtained when the hexagonal arrangement is used. The 1 inch internals enhanced the gas holdup and specific interfacial area near to the wall regions. In the churn turbulent regime, Bubbles chord length and bubbles rise velocity were found to be larger with the presence of internals when compared to bubble column without internals"--Abstract, page iv.