Faithin Omaha eBook Collection

Download or read book Fabrication and Characterization of Graphene Based 2D Materials for Supercapacitors written by Anishkumar Manoharan and published by . This book was released on 2018 with total page 246 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supercapacitors have attracted a lot attention due to their efficient energy storage. In comparison to batteries, supercapacitors have high capacitance, energy, and power densities per unit mass than conventional capacitors. Carbon based materials are most promising in supercapacitor application due to their outstanding physical and electrochemical behavior. In this work, a facile method to synthesize a nanocomposite electrode consisting of annealed carbon from carbon ink and MoS2 was demonstrated. Effects of various aqueous and solid electrolytes were studied. It was found that the nanocomposite electrode with 10% MoS2 and 1M Na2SO4 as the aqueous electrolyte tested using the three electrode method exhibited a capacitance of 207.5 F/g at a current density of 0.5 A/g. However, with the influence of K+ ions, the 10% MoS2 nanocomposite electrode based electric double layer (EDL) capacitor displayed a comparatively higher capacitance of 10.1 F/g at a current density of 1 A/g with 0.5 M K2SO4 as the aqueous electrolyte. The button cell EDL capacitor performance was further improved up to 50% using 1 M Na2SO4 aqueous electrolyte (15.2 F/g at a current density of 1 A/g) in comparison to using 0.5 M Na2SO4 aqueous electrolyte (4 F/g at a current density of 1 A/g). Pouch cell supercapacitors were fabricated using both aqueous and solid electrolytes which had almost similar overall performance. A MoS2/annealed carbon nanocomposite based supercapacitor with solid electrolyte which possesses capacitance and energy density of 10.6 F/g and 5.9 Wh/Kg, respectively, was demonstrated. A cylindrical cell supercapacitor was fabricated using 1M Na2SO4 as the aqueous electrolyte and yielded capacitance and energy density of 6.7 F/g and 4.9 Wh/Kg, respectively, at a current density of 1 A/g.